Custom Name and Number Football Jersey: XS to 6XL

Custom name and number printing on football jerseys from XS to 6XL: font choice, lettering sizes by shirt size, spelling checks and print care.

Custom name and number printing puts a player’s name above a number on the back of the shirt, in a font and size matched to the shirt, and it is available on every size from XS to 6XL. The things that go wrong are almost never the printing itself: they are the spelling, the size of the lettering relative to the shirt, and a font that does not match the era of the kit.

What you choose when you order

Four decisions, in this order: the font, the number size, the colour combination, and whether the name goes above the number or only the number is printed. Everything else — spacing, curvature, whether the name follows the shoulder line — is set by the shirt’s construction and should not be invented at the artwork stage.

ElementTypical rangeWhat it affects
Number height, adultAbout 20–25 cmLegibility, print weight, how it sits on the back panel
Number height, youthAbout 15–18 cmProportion on a smaller back panel
Name heightAbout 6–8 cm capitalsReadability at distance; long names need a smaller size
Name positionAbove the number, centred on the shoulder lineBalance of the back panel
Font styleBlock, league-style, retro serifWhether the shirt reads as modern or period-correct
ColourContrast layer plus outlineVisibility against the shirt colour

Font matters more than people expect

A modern replica shirt and a 1990s retro shirt were not printed with the same lettering. Block lettering with a thin outline belongs to modern kits; older shirts used simpler shapes, sometimes with a heavier serif or a plainer sans. Putting a modern league-style font on a retro shirt is the single most common way a custom order looks wrong, even when the print quality is perfect.

Ask for the font to be shown against the actual shirt colour before production. A font that looks good on a white background can disappear against a striped or hooped shirt, where the lettering crosses two colours.

Size and proportion

The number has to scale with the shirt. A 25 cm number on a 6XL back panel looks small; the same number on an XS looks oversized and can run into the side seams. The table below shows how we scale lettering across the run.

TallaNumber heightName heightPractical note
XS18–20 cm5–6 cmKeep the number clear of the side seams
S20–22 cm6 cmStandard adult proportion starts here
M22–23 cm6–7 cmMost common adult combination
L23–24 cm6–7 cmWatch long surnames at this width
XL24–25 cm7 cmName can run wide on broad shoulders
2XL25 cm7 cmCheck the print does not cross the shoulder seam
3XL25–26 cm7–8 cmProportion starts to look small without scaling
4XL26 cm8 cmCentre on the back panel, not the shirt width
5XL26–27 cm8 cmConfirm print area with the factory
6XL27 cm8 cmLargest standard print block

The full size range, for reference

TallaShirt chestLengthShoulder
XS96 cm / 37.8 in63 cm / 24.8 in43 cm
S102 cm / 40.2 in65 cm / 25.6 in45 cm
M106 cm / 41.7 in67 cm / 26.4 in47 cm
L112 cm / 44.1 in70 cm / 27.6 in50 cm
XL118 cm / 46.5 in73 cm / 28.7 in53 cm
2XL122 cm / 48.0 in76 cm / 29.9 in56 cm
3XL127 cm / 50.0 in79 cm / 31.1 in59 cm
4XL132 cm / 52.0 in82 cm / 32.3 in62 cm
5XL137 cm / 53.9 in85 cm / 33.5 in65 cm
6XL142 cm / 55.9 in88 cm / 34.6 in68 cm

If you are unsure which size to print, the XS to 6XL size hub explains how to read the measurements, and the measuring guide shows how to take your own.

Spelling, accents and long names

Printed text is final. We confirm the spelling in writing before production and ask you to check it letter by letter, including accents and hyphens. Two practical notes: names are usually printed in capitals, and a long surname at a fixed name height will run wider than a short one — if the shirt is an XS or a child’s size, the name may need to be scaled down to stay inside the back panel.

Some names carry characters that a given font does not support. If an accent is missing from the font you chose, either the font changes or the character is dropped — and dropping it silently is how a shirt arrives with the wrong name. Ask, do not assume.

How the print is applied and how to keep it

Name and number sets are heat-applied, which is how professional lettering is produced and how it sits flat on the back panel. That also means the care rules matter: wash inside out, cold, no fabric softener, and never tumble dry on a high setting. Ironing directly over the print will lift it.

If you want the stitched option for a retro shirt, that is a different construction with a longer lead time. The heat press versus stitched guide covers the trade-off, and the wash guide covers the routine.

Sleeve patches and extra marks

Some shirts carry competition or anniversary marks on the sleeve. If you want those added, say so at the artwork stage: the placement depends on the sleeve length and the size, and a patch placed for an XL will sit too low on an XS. We ask for the print area on the actual size you ordered rather than applying a standard layout.

Lead time and ordering

Printing adds one to three business days to production, because the print has to cure before packing. That is on top of production and transit, not instead of it. If you need the shirt for a date, the Christmas delivery cut-off guide shows how far back to work.

For a team, send the roster as a list: name, number, size, and any sleeve marks, one line per player. Mixed sizes in one order are routine, and every shirt can be a different size, including custom sizes for players who do not fit the standard run. The custom size guide covers that route.

FAQ

Can I put any name on the shirt?

Any name or nickname that is not offensive and does not infringe a trademark. We will not print a name and number combination that impersonates a specific player’s release, and we ask for your text rather than suggesting one.

What number size should I choose?

Use the table above for the shirt size you ordered. If you want it larger or smaller than standard, say so before artwork; scaling after approval changes the layout.

Can I print on both sides?

Yes, a name and number on the back and a smaller print on the front chest. Front prints need their own placement check against the badge.

Does printing change the delivery time?

It adds one to three business days for curing before packing, on top of production and shipping.

Can I order printing on a custom size shirt?

Yes. Custom size and custom printing are independent options and can be combined on the same order.

What happens if the spelling is wrong?

We confirm the text in writing before production and ask you to check it. Once printed, the shirt cannot be corrected, which is why the confirmation step exists.

Send the shirt, the size, the name and the number, and we will reply with the font, the size of the lettering and a proof before production: +1 917 764 5459.

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *