Player Version vs Fan Version Jersey Sizing: XS to 6XL

Player version shirts run one to 1.5 sizes tighter than fan versions and rarely pass 3XL. How to choose between the two across XS to 6XL.

Short answer: a player version is cut one to one and a half sizes tighter than the fan version of the same shirt. If you normally wear a fan XL, expect to need a player 2XL, and if you are above 3XL the fan version or a made-to-measure athletic cut is usually the only realistic option.

Both shirts carry the same badge and the same colours, so the difference is easy to miss in photos. It shows up the moment you put one on: the player version hugs the chest, sits closer under the arms and uses lighter fabric. Knowing which one you are buying is the difference between a favourite shirt and one that stays in the wardrobe.

What actually differs

FeatureFan versionPlayer version
CutRegular, room to moveAthletic, tapered through chest and waist
Chest ease5–8 cm over body0–3 cm, close to skin
SleeveLonger, looser openingShorter, narrow opening
FabricHeavier polyester, durableLighter, more breathable, more delicate
BadgesEmbroidered or stitchedOften bonded or heat transferred
Sizing adviceYour measured sizeUp one, up two for a relaxed fit
Big sizesAvailable to 6XL hereUsually stops at 2XL–3XL

Neither is better. The fan version is more comfortable for standing in, travelling and wearing over a hoodie. The player version looks sharper and feels lighter, at the cost of tolerance for anything other than an athletic build.

The size-up rule, in numbers

If you already know your fan size, the conversion is simple:

Your fan sizePlayer size for a close fitPlayer size for a relaxed fit
XSSM
SML
MLXL
LXL2XL
XL2XL3XL
2XL3XL4XL (custom cut)
3XL4XL (custom cut)5XL (custom cut)
4XL–6XLPlayer cut not normally produced; choose fan or made-to-measure athletic cut

This is a rule of thumb, not a conversion chart. Puma player versions run tighter than Nike and Adidas, so at the top of the range you may need an extra size or a custom cut. Our brand sizing comparison covers those differences.

Fan version measurements, XS to 6XL

The table below is our standard fan cut. A player version in the same labelled size will measure smaller in the chest, shoulder and sleeve.

TallaShirt chestLengthShoulderSleeve
XS96 cm / 37.8 in63 cm / 24.8 in43 cm21 cm
S102 cm / 40.2 in65 cm / 25.6 in45 cm21 cm
M106 cm / 41.7 in67 cm / 26.4 in47 cm22 cm
L112 cm / 44.1 in70 cm / 27.6 in50 cm22 cm
XL118 cm / 46.5 in73 cm / 28.7 in53 cm23 cm
2XL122 cm / 48.0 in76 cm / 29.9 in56 cm24 cm
3XL127 cm / 50.0 in79 cm / 31.1 in59 cm24 cm
4XL132 cm / 52.0 in82 cm / 32.3 in62 cm25 cm
5XL137 cm / 53.9 in85 cm / 33.5 in65 cm25 cm
6XL142 cm / 55.9 in88 cm / 34.6 in68 cm26 cm

Use the chest column as your anchor. If your chest is 104 cm and you want a close but wearable shirt, the M (106 cm) is a fan fit and the L (112 cm) is a relaxed one. The same body in a player version would need an L or XL to avoid pulling across the chest.

Why big sizes are almost always fan versions

Player shirts are made for a squad, and squads do not carry 5XL. That is the whole explanation. Above 2XL or 3XL, brands simply stop, which is why 4XL to 6XL buyers are pushed towards fan cuts whether they want the lighter fabric or not.

Our approach is to cut the fan shirt properly across the full XS to 6XL range, then offer a made-to-measure option with a tapered athletic pattern for anyone who wants the player look in a bigger size. You get the fit you asked for instead of a scaled-up medium.

The range is explained on the XS to 6XL hub, and the measuring process is in the measurement guide. Taller buyers should also read the length guide, because player cuts are shorter in the body as well as tighter in the chest.

Printing, washing and wear

Name sets and numbers stiffen the back panel. On a tight player shirt that can cause the print to crease or lift at the edges, so if you are customising, the fan version in your measured size is the safer choice. Wash both versions inside out, cold, and skip the dryer; the lighter player fabric is less forgiving of heat. Our washing guide has the full routine.

Questions buyers ask most

How much tighter is a player version jersey?

About one to one and a half sizes tighter than the fan version in the same brand. The chest is the main difference; the sleeves are also narrower and shorter. If you want the player look without the compression feel, go up two sizes.

Do player version jerseys come in 4XL, 5XL or 6XL?

Rarely. Most brands stop player versions at 2XL or 3XL because the cut is designed for athletes. For 4XL to 6XL, the fan version or a made-to-measure shirt with an athletic cut is the realistic route.

Is the fan version the same as a replica?

Yes in everyday use. Fan, stadium and replica all describe the looser retail shirt. Player, authentic and match describe the tighter on-pitch version. The names vary by brand, the fit difference does not.

Should I size up for a player version if I have broad shoulders?

Yes, and consider two sizes. Player versions taper hard through the chest and armhole, so broad shoulders and larger arms are the first place they feel tight. Our broad shoulder guide explains how to check the armhole before ordering.

Does printing affect which version I should buy?

It affects the fit slightly. Printing stiffens the back panel, so a tight player version can pull and crease the name set. If you are adding a name and number, the fan version in your measured size, or one size up, keeps the print flat.

Still unsure between two sizes? Send your chest measurement, height and the fit you prefer on WhatsApp and we will confirm the size before you order. We cut XS to 6XL as standard and make to measure outside that range.

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *